Getting Your Prefab Building Permit-Ready: Third-Party Compliance and Certificate of Occupancy

One of the most important reasons to purchase an Austin Mohawk building is our turnkey experience. It completely shatters the lead time versus building on site. The booth shows up complete with wiring, components, and hookup capabilities. Once you unload and anchor your booth, all that is left is to connect to power and you are all set — what we call "Plug and Play.”

There may, however, be certain situations where you need a certificate of occupancy for the booth. This can put you in a tough position if you are working with a manufacturer who doesn't understand all the details. To explore if you need such certification, check with your local jurisdiction.

Why Austin Mohawk Understands Third-Party Certification

Depending on what your town or city requires, there may be a request for a third-party certification for the state. This means the building needs to have certification of certain requirements from an approved third-party agency. These details can be as simple as energy code compliance or as intricate as local jurisdiction requirements for wind, snow, and seismic calculations. An outside inspector will visit our shop and ensure we are following the manufacturing steps to meet compliance. Next, the state of the building's destination will send a label indicating that the booth has been certified for a certificate of occupancy.

The Compliance Process: What Happens Behind the Scenes

Steps for compliance once state & local jurisdictions' requirements are known.

• Identify and confirm booth can meet that state’s energy code requirements
• Design booths contain necessary insulation, glazing, and material details for each specific location
• Prepare PE stamped drawings for the Third Party
• Third Party confirms and sends to state
• State greenlights Third Party to meet Austin Mohawk in our shop for inspections
• Third Party signs off and facilitates the state issuing third-party compliance via a state label

Our 53-Step Quality Control Process

If third-party compliance is required, it's critical that you have a fabricator who ensures that quality steps are part of its standard operating process. Our process includes 53 quality-control steps. Without proper experience, you may have unplanned delays in your project.

Expert Guidance for Your Certificate of Occupancy

If you are in the market for a new prefabricated building with a certificate of occupancy, this guide is a helpful start for choosing a course of action. Reach out to Austin Mohawk, and our representatives can provide further knowledge and assistance in making this decision.